LS2-24W Lift Table 2,000 Lbs. Capacity 30-3/4" Raised Height 36" x 36" Standard Platform
|Raised Height (in.)||30-3/4"|
|Lowered Height (in.)||6-3/4"|
|Standard Platform (in.)||36" x 36"|
|Maximum Platform (in.)||60" x 60"|
This 2,000 pound capacity lift table features a wider platform than our standard lifts. It is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping.
Low pressure hydraulics, Fast raising and lowering, Fully adjustable down speed, Heavy-duty torque tubes to minimize deflection, Lubricated for life pins, rollers and bushings, Full width straight through axles for increased stability throughout the travel range, Heavy-duty wire braided hoses for maximum burst strength, Tell-tale return hydraulic line prevents fluid spillage, Built-in maintenance chocks, Bolt-on power unit is neat, clean and allows for easy access to all components
Quality Features for Reliabilty and Long Life
With extra width at the pivot point, Southworth’s contoured legs combine great strength with lower collapsed height.
All pivot points have hardened pins that operate in lubricated-for life, virtually maintenance free bushings.
All Southworth lifts have heavy-duty hoses with burst strength 600% greater than the hydraulic operating pressure.
Oversize, Low-Pressure Hydraulic Cylinders
Low operating pressure extends the life of hydraulic components. Chrome plated piston rods are corrosion resistant, and cylinder walls are honed.
Built-In Safety Chock
Prevents accidental lowering of table during maintenance.
Comfort Edge Design
No sharp corners on table top. Bright safety yellow stripe for high visibility.
Heavy-Duty Torque Tubes
Torque tubes minimize platform twisting and deflection for high degree of rigidity and stability.
Tell-Tale Return Hydraulic Fluid Line
Clear plastic return line from cylinder rod bearing to tank gives visual indication of need to repack cylinder and prevents fluid spillage in the event of a bypass.
Adjustable Flow Control
Pressure compensated flow control valve with lock out. Preset and locked at 10 F.P.M. maximum lowering speed per ANSI Standard, MH29.1 where applicable.
Wear Indicating Rollers and Roller Retainers
Rollers are captured in the base by means of retainers to prevent accidental separation or misalignment. All oversized width tabletops also include an upper set of retainers.
Southworth Scissors Lifts are designed and manufactured to meet or exceed ANSI MH29.1 Safety Requirements for Industrial Scissors Lifts.